Volume 12, Number 23 (9-2016) | 2016, 12(23): 1-14 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Yari E, Ghassemi H. Numerical Investigation of Fluid Flow Around a Cross-Section of Surface Piercing Propeller with Linear Trailing Edge Profile in Various Weber Numbers. International Journal of Maritime Technology. 2016; 12 (23) :1-14
URL: http://ijmt.ir/article-1-373-en.html

PhD of marine engineering-hydrodynamic Maleke ashtar University of Technology
Abstract:   (462 Views)

In this study, two-dimensional flow analysis around cross-section of the surface piercing propeller with a linear profile trailing edge is studied in different Weber numbers. Due to collision of the two-dimensional cross section with surface water, aeration zone is created on the suction side that is heavily impact on the results. The ventilation pattern is a function of the geometrical parameters. In this article, in particular, the effect of surface tension and the Weber number have been investigated. According to the obtained results at low Weber numbers, the surface tension effect increases the amount of water surface uplift, and water droplets are visible in the trailing edge of blade section. At Weber numbers higher than critical Weber number, surface tension effect will only cause loss of fluid droplets in the inlet region.

Full-Text [PDF 2984 kb]   (151 Downloads)    
Type of Study: Research Paper | Subject: CFD
Received: 2015/01/5 | Accepted: 2016/10/30 | Published: 2016/10/30

1. Shiba, H. (1953), Air-drawing of marine propellers, Technical Report 9, Transportation Technical Research Institute.
2. Hadler, J. and Hecker, R. (1968), Performance of partially submerged propellers, in The 7th ONR Symposium on Naval Hydrodynamics, Rome, Italy.
3. Hecker, R. (1973), Experimental performance of a partially submerged propeller in inclined flow. Lake Buena Vista, FL. SNAME Spring Meeting.
4. Rains, D. A. (1981), Semi-submerged propellers for monohull displacement ships. In Propeller ’81 Symposium, pages pp. 15–40, Virginia Beach, VA. Society of Naval Architects and Marine Engineers.
5. Rose, J. C. and Kruppa, C. F. L. (1991), Surface piercing propellers – methodical series model test results. In FAST’91, Norway
6. Kruppa, C. F. L. (1992), Testing surface piercing propellers. In Hydrodynamics: Computations, Model Tests, and Reality, pages pp. 107–113.
7. Rose, J. C., Kruppa, C. F. L., and Koushan, K. (1993), Surface piercing propellers - propeller/hull interaction
8. Wang, D. (1977), Water entry and exit of a fully ventilated foil. Journal of Ship Research, 21:pp. 44–68.
9. Oberembt, H. (1968), Zur bestimmung der instation¨aren fl¨ugelkr¨afte bei einem propeller mit aus dem wasser herausschlagenden fl¨ugeln. Technical report, Inst.f¨ur Schiffau der Universit¨at Hamburg, Bericht Nr. 247.
10. Furuya, O. (1985), A performance prediction theory for partially submerged ventilated propellers. Journal of Fluid Mechanics, 151:pp. 311–335.
11. Wang, D. (1979), Oblique water entry and exit of a fully ventilated foil. Journal of Ship Research, 23:pp. 43–54.
12. Mario Caponnetto. (2002), RANSE Simulations of Surface Piercing Propellers. Rolla Research.
13. Andrea Califano, Sverre Steen. (2009), Analysis of different propeller ventilation mechanisms by means of RANS simulations. First International Symposium on Marine Propulsors, smp’09, rondheim, Norway, June.
14. Anna M. Kozlowska,Katja Wöckner, Sverre Steen,Thomas Rung, Kourosh Koushan, Silas Spence.(2009), Numerical and Experimental Study of Propeller Ventilation. First International Symposium on Marine Propulsors, smp’09, rondheim, Norway, June.
15. Kourosh Koushan, Silas Spence, Luca Savio. (2011), Ventilated Propeller Blade Loadings and Spindle Moment of a Thruster in Calm Water and Waves. Second International Symposium on Marine Propulsors, smp’11, Hamburg, Germany, June.
16. M.Ferrando, M.Viviani, S.Crotti, P.cassella and Caldarella. (2006), Influence of weber number on surface piercing propellers model test scaling. Universita degli studi di Genova (DINAV), Genova, Italy, pp.667-676, 2006.
17. Kohei Himei (2013), Numerical Analysis of Unsteady Open Water Characteristics of Surface Piercing Propeller. Third International Symposium on Marine Propulsors smp’13, Launceston, Tasmania, Australia, 292-297.
18. D. C.Wilcox. (1998), Turbulence Modeling for CFD. DCW Industries, Inc. La Canada, California.
19. Cox, B. D. (1971), Hydrofoil theory for Vertical Water Entry. PhD thesis, Department of Naval Architecture, Massachusetts Institute of Technology.
20. J. U. Brackbill, D. B. Kothe, and C. Zemach. (1992), A Continuum Method for Modeling Surface Tension. J.Comput. Phys. 100. 335–354.

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author

Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.