Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Investigation the effect of Land Characteristics on Hurricane Freshwater Flood Vulnerability
1
9
EN
Mehdi
Rezapour
Chabahar Maritime University
Tom
Baldock
School of Civil Engineering, University of Queensland, St Lucia, QLD, 4072, Australia.
This study analyses two comparison examples (hurricanes Frances versus Jeanne and hurricanes Rita versus Irene) to account for the catchment characteristics and social factors for the area impacted by the track of a tropical cyclone. This will result in a way of categorizing tropical cyclone, which can be combined with the previous meteorological indexes to better assess the potential impact of each tropical cyclone from a hazard mitigation and the disaster response perspective. Given that the highest correlation between fatalities and damage occurs for the rainfall index TCRI, vulnerability to rainfall was selected as the focus of the research. The results show that the impacted areas and the population who lives in the impacted areas are two important indicators of flood vulnerability. The new index (TRI) yields a lower RMSE in rank position, at 3.5 and 2.2, compared with the SSHE at 5.8 and 5.7 for selected hurricane damage and death toll, respectively.
Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Inclination angle effect on ventilation pattern and trailing wake formation of the partially submerged propeller
11
19
EN
Ehsan
Yari
Maleke Ashtar University of Technology
Ali
Barati Moghaddam
Maleke Ashtar University of Technology
Partially submerged propellers function in two-phase condition, i.e. each propeller blade enters water once in each revolution so the thrust and torque of each blade hit maximum level and then become around zero. Surface-piercing propeller investigated in this work is a new geometry that the main purpose of its design has been to achieve higher hydrodynamic performance; minimizing energy loss by reducing of the volume fraction of the water adhered to the exiting blade from the water surface. In this article, Reynolds-Averaged Navier–Stokes computations based on finite volume method (FVM) was applied to investigate force excitation, ventilation pattern and wake formation of the partially submerged propeller under inclination angle. Two-phase flow field equations were solved using homogenous Eulerian multiphase model by sliding method. To solve two-phase flow field at the free surface accurately and deal with free surface effects in calculations, CFX free surface model based on volume of fluid (VOF) approach was used. The accuracy of the numerical method was verified using series of simulations on SPP-841B propeller with existing experimental measurements. Comparison between simulated and measured SPP-841B open characteristics as well as ventilation pattern of the key blade indicated a reasonable agreement with experimental data and observations. Based on obtained data, with an increase in shaft inclination angle, propeller thrust and torque coefficients increased, whereas the propeller efficiency was decreased.
Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Reliability Assessment of Offshore Pipeline Due to Pitting Corrosion
21
29
EN
Seyed Mohammad Hossein
Sharifi
Faculty of Mechanical Engineering, Petroleum University of Technology
Nima
Pirali
Student in Offshore Structural Engineering, Petroleum University of Technology
Pitting is one of the most localized forms of corrosion attacks which cannot be detected easily. Pitting decreases the pipe wall thickness and also the pipeline strength against environmental and operational loads. The purpose of this article is to investigate the most common reliability methods for estimating the maximum pitting depth and the effect of internal pressure on the remaining strength of corroded pipelines at different times in its lifetime service based on different failure pressure models using first-order approximation and sampling reliability methods. To investigate the effect of pitting growth and variation of internal pressure on pipeline characteristics, sensitivity analysis with gamma index several times in pipeline lifetime was performed. It is concluded that the first-order reliability method was applicable for ASME failure pressure models, also concluding that internal pressure and pipeline wall thickness are the most effective load and capacity parameters in failure probability of corroded pipelines. The reliability analysis was performed for two pipeline classes and two different pipeline wall thicknesses and it is concluded that the increase in pipeline wall thickness has more effect on decreasing the probability of failure (POF) of the pipeline than using a pipeline with higher classification.
Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Ocean Circulation to Blame for Red Tide Outbreak in the Persian Gulf and the Sea of Oman
31
39
EN
Mehrdad
Bakhtiar
Iran University of Science & Technology
Ahmad
Rezaee Mazyak
Tarbiat Modares University
Mohammad
Khosravi
Pars Geometry Consultants
Red tide is a phenomenon that occurs by rapid growth or proliferation of toxic algae. The growth and spread of this phenomenon can threaten marine ecosystems, human health, aquaculture, water desalination plans, tourism and fisheries industries. Ocean currents are one of the affecting factors of the distribution of this phenomenon. In this study, the role of ocean current in chlorophyll-a distribution is investigated on the north coast of the Arabian Sea, the Sea of Oman and the Persian Gulf. The monthly MODIS satellite chlorophyll-a concentration data is used to study the red tide and the HYCOM model analysis result to study the current ocean pattern from 2002 to 2018 and in 2016 as an example. The currents in this area cause chlorophyll-a spreading and transfer of nutrients necessary for chlorophyll-a proliferation and red tides events. There are four main sources of chlorophyll expansion and proliferation in the region: the eastern shores of the Arabian Sea, the northern shores of the Arabian Sea and the Sea of Oman, the Strait of Hormuz, and the northwestern shores of the Persian Gulf. The northeastern currents in East Oman transport chlorophyll to the north of the Arabian Sea and the northwestern currents in the west of the Arabian Sea move chlorophyll from the coasts of India and Pakistan to the west and dispersed it to the west in the northern shores of the sea of Oman.
Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Assessment of noise in time series analysis for Buoy tide observations
41
49
EN
Saeed
Farzaneh
School of Surveying and Geomatics Engineering Faculty of Engineering University of Tehran
Mohammad Ali
Sharifi
School of Surveying and Geomatics Engineering Faculty of Engineering University of Tehran
Kamal
Parvazi
School of Surveying and Geomatics Engineering Faculty of Engineering University of Tehran
Bahare
Namazi
School of Surveying and Geomatics Engineering Faculty of Engineering University of Tehran
To extract valid results from time series analysis of tides observations, noise reduction is vital. This study aimed to use a precise statistical model to investigate noise types. Noise component amplitude of the proposed model was studied by Least Square Estimation (LS-VCE) through different statistical models: (1) white noise and auto-regressive noise, (2) white noise and Flicker noise, (3) white noise and random walk noise, (4) white noise and Flicker noise and random walk, and (5) auto-regressive noise and Flicker noise. Based on the values obtained for the Likelihood Function, it was concluded that the noise model that can be considered for observations of the Buoy time series includes two white and Flicker noises. In addition, tide forecasting for all stations was done by extracting important frequency calculated in two cases: (1) the first case in which matrix of observation weight matrix was considered as the unit matrix or the noise model was just a white noise (2) the case in which matrix of observation weight matrix was considered as a combination of white and Flicker noises. The results show that use of precise observation weight matrix resulted in 11 millimeter difference compared to the case in which observation with unit weight matrix was used.
Iranian Association of Naval Architecture & Marine Engineering
International Journal of Maritime Technology
2345-6000
13
Winter and Spring 2020
2020
1
1
Hydroelastic Analysis of Composite Marine Propeller Basis Fluid-Structure Interaction (FSI)
51
59
EN
Amir Arsalan
Shayanpoor
Khorramshahr University of Marine Science and Technology
Ahmad
Hajivand
Khorramshahr University of Marine Science and Technology
Masih
Moore
Khorramshahr University of Marine Science and Technology
In recent decades, there has been a growing demand for composite materials with high strength to weight ratio and high stiffness to weight ratio for use in the marine industry to improve the hydrodynamic and structural performance of vessels and propulsion systems. Apart from the advantages of composite propellers over their metal counterparts, deformations of these propellers under loading can alter their hydrodynamic effects. This paper was a hydroelastic analysis of a composite marine propeller made of carbon fiber laminate. This analysis was performed by the use of CFD-FEM based on the two-way fluid-structure interaction (FSI) coupling on the 3D geometry of the KP458 propeller. The CFD results are compared with the experimental data reported by Hyundai Maritime Research Institute (HMRI), for advance ratios of 0.1-0.5, which shows a perfect agreement among them. An increase in the efficiency of the flexible propeller is observed in different advance ratios due to an increase in thrust (1-4%) and a decrease in torque (1-6%).