Volume 8 -                   ijmt 2017, 8 - : 47-58 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Taghizadeh Edmollaii S, Edalat P. Accidental Limit State of Submarine Pipeline: Trawl Gears Pull-Over Loads and Effect of Free Span. ijmt. 2017; 8 :47-58
URL: http://ijmt.ir/article-1-610-en.html
1- Faculty of Marine Engineering, Petroleum University of Technology
Abstract:   (1138 Views)
Submarine pipelines failures lead to oil spills in water and may even lead to explosions with heavy financial and environmental damages. Trawl gear is one of the main factors in the failure of the submarine pipelines. In this paper, sensitivity analysis is performed on influence of height and span length alternations on the response of pipeline against the traction caused by trawling pull-over load. The FE model is presented using OrcaFlex software including modeling of seabed, pipeline and trawl gear parameters. To model soil and reinforced concrete, nonlinear parameters are considered. To verify the models, DNV-RP-F111 and results of modeling by SAGE Profile software is used. The results indicated that increase in span gap resulted in the increase in pipeline responses, but with the increase in span length, only the lateral displacement exhibited a considerable increment. Finally, Maximum time for pipeline to fail and system response to become greater than the standard level has been calculated.
Full-Text [PDF 1059 kb]   (442 Downloads)    
Type of Study: Research Paper | Subject: Offshore Structure
Received: 2017/04/24 | Accepted: 2017/11/25

1. Kawsar, M. R. U., Youssef, S. A., Faisal, M., Kumar, A., Seo, J. K., & Paik, J. K. (2015). Assessment of dropped object risk on corroded subsea pipeline. Ocean Engineering, 106, 329–340. [DOI: 10.1016/j.oceaneng.2015.06.056]
2. Mustafina, A., (2015), Anchor Damage Assessment of Subsea Pipelines - Optimization of Design Methodology, (Master's thesis in Offshore technology, University of Stavanger, Norway), Retrieved from http://hdl.handle.net/11250/1248742.
3. DNV GL, (2012), DNV-OS-F101 Submarine Pipeline Systems, Det Norske Veritas, Norway.
4. Bai, Y., Bai, Q., (2005), Subsea pipelines and risers, Oxford UK: Elsevier Ltd, p. 173-194.
5. DNV GL, (October2010), DNV-RP-F111 Interference between Trawl Gear and Pipelines, Det Norske Veritas, Norway.
6. Gjørsvik, O., Kjeldsen, S., Lund, S., (1975), Influences of bottom trawl gear on submarine pipelines, seventh annual offshore technology conference, p. 337-345.
7. 7- Carstens, T., Kjeldsen, S., Gjørsvik, O., (1976), The conflict between pipelines and bottom trawls - some results from laboratory and field tests, Offshore north sea technology conference and exhibition.
8. Moshagen, H., Kjeldsen, S., (1980), Fishing gear loads and effects on submarine pipelines, Twelfth annual offshore technology conference, p. 383-392.
9. Bergan, P.G., Mollestad, E., (1982), Impact-response behavior of offshore pipelines, J Energy Resour-ASME, 104:325–9. [DOI: 10.1115/1.3230423]
10. Guijt, J., Horenberg, J.A.G., (1987), Recent investigations concerning the effect of bottom trawl gear crossings on submarine pipeline integrity, Nineteenth annual offshore technology conference, p. 573–580. [DOI: 10.4043/5616-MS]
11. Verley, R.L.P., Moshagen, B.H., (1992), trawl forces on free-spanning pipelines. Int J Offshore Polar.
12. Fyrileiv, O., Askheim, D., Verley. R., Rolsdorph, H., (2006), Pipeline-Trawl Interaction: Effect of Trawl Clump Weights, ASME. International Conference on Offshore Mechanics and Arctic Engineering. [DOI: 10.1115/OMAE2006-92128]
13. Igland, R.T., Soreide, T., (2008), Advanced Pipeline Trawl Gear Impact Design, ASME, International Conference on Offshore Mechanics and Arctic Engineering, Volume 3: Pipeline and Riser Technology. [DOI: 10.1115/OMAE2008-57354]
14. Teigen, P., Ilstad, H., Levold, E., & Hansen, K. (2009, January 1), Hydrodynamical Aspects of Pipeline Over trawling, International Society of Offshore and Polar Engineers.
15. Herlianto, I., Chen, Q., Karunakaran, D., (2012), Lateral Buckling Induced by Trawl Gears Pull-Over Loads on High Temperature/High Pressure Subsea Pipeline, ASME, International Conference on Offshore Mechanics and Arctic Engineering, Volume 3: Pipeline and Riser Technology. [DOI: 10.1115/OMAE2012-83298]
16. Longva, V., Saevik, S., Levold, E., Ilstad, H., Teigen, P., (2011), Dynamic Simulation of Free-Spanning Pipeline Trawl Board Pull-Over, ASME, International Conference on Offshore Mechanics and Arctic Engineering, Volume 4: Pipeline and Riser Technology. [DOI: 10.1115/OMAE2011-49592]
17. Van den Abeele, F., Galvan, B.C., Ramos, P., Muylle, J., (2013), Numerical simulation of the interference between trawl gear and offshore pipelines,6^th International Pipeline Technology Conference, Ostend.
18. Yohannes, B., (2012), Trawl Gear interaction with Subsea Pipelines, (Master's thesis in Offshore technology, University of Stavanger, Norway), Retrieved from http://hdl.handle.net/11250/183133.
19. OrcaFlex manual version 9.7a, Orcina, 2013.

Send email to the article author

Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.