XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mahmoodi M, Shademani R, Gorji Bandpy M. Viscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers. ijmt. 2018; 9 :1-13
URL: http://ijmt.ir/article-1-602-en.html
1- Ph.D. Student Babol Noshirvani University of Technology
2- Ph.D. Student Amirkabir University of Technology
3- Professor Babol Noshirvani University of Technology
Abstract:   (1220 Views)
In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) scheme in ANSYS Fluent and ANSYS CFX and Phase Field scheme in COMSOL Multiphysics. The method and scheme of simulation are validated by experimental data for geometry with one wedge. The dynamic mesh, mesh motion and moving mesh models are used to simulate dynamic motion of the wedges in ANSYS Fluent, ANSYS CFX and COMSOL Multiphysics, respectively. The vertical velocity and pressure coefficient versus time are determined and comparisons of the computed mentioned parameters against experimental data are performed. The eight characteristics effects of fluid flow are investigated till 0.25 second after wedges falling including impact event. It is demonstrated that the ANSYS Fluent and k-ε were the best software and viscous model, respectively.
Full-Text [PDF 1037 kb]   (265 Downloads)    
Type of Study: Research Paper | Subject: Ship Hydrodynamic
Received: 2017/03/17 | Accepted: 2017/11/9

References
1. Xu, G.D., Duan, W.Y., and Wu, G.X., (2008), Numerical simulation of oblique water entry of an asymmetrical wedge, J. Ocean Engineering, Vol.35, p.1597-1603. [DOI: 10.1016/j.oceaneng.2008.08.002]
2. Von Karman, T., (1929), The impact of seaplane floats during landing, NACA TN 321, Washington, DC.
3. Wagner, H., (1932), The phenomena of impact and planing on water. National Advisory Committee for Aeronautics, Translation, 1366, Washington, DC ZAMM. J. App. Math. Mech. Vol.12(4), p.193–215.
4. Shademani R. and Ghadimi, P., (2017), Asymmetric water entry of twin wedges with different deadrises, heel angles, and wedge separations using finite element based finite volume method and VOF, Journal of Applied Fluid Mechanics, Vol.10(1), p.353-368. [DOI: 10.18869/acadpub.jafm.73.238.26185. 353]
5. Ghazizade-Ahsaee, H. and Nikseresht, A.H., (2013), Numerical Simulation of Two Dimensional Dynamic Motion of the Symmetric Water Impact of a Wedge, International journal of maritime technology, Vol.1(1), p.11-22.
6. Armand, J.L. and Cointe, R., (1987), Hydrodynamic impact analysis of a circular cylinder, 5th International Offshore Mechanics and Arctic Engineering. Tokyo, p.609-634.
7. Greenhow, M. (1987), Wedge entry into initially calm water, J. Applied Ocean Research. Vol.9, p.214-233. [DOI: 10.1016/0141-1187(87)90003-4]
8. Farsi, M. and Ghadimi, P., (2015), Simulation of 2D symmetry and asymmetry wedge water entry by smoothed particle hydrodynamics method, J Braz. Soc. Mech. Sci. Eng. Vol.37(3), p.821-835. [DOI: 10.1007/s40430-014-0212-5]
9. Farsi, M. and Ghadimi, P., (2016), Effect of flat deck on catamaran water entry through smoothed particle hydrodynamics, In Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Vol.230(2), p.267-280. [DOI: 10.1177/1475090214563960]
10. Yamada, Y., Takami, T. and Oka, M., (2012), Numerical study on the slamming impact of wedge shaped obstacles considering fluidstructure interaction (FSI), In Proceedings of the International Offshore and Polar Engineering Conference.
11. Luo, H., Wang, H. and Soares, C.G., (2012), Numerical and experimental study of hydrodynamic impact and elastic response of one free-drop wedge with stiffened panels, Ocean Eng. Vol.40, p.1-14. [DOI: 10.1016/j.oceaneng.2011.11.004]
12. Ghadimi, P., Saadatkhah, A. and Dashtimanesh, A. (2011), Analytical solution of wedge water entry by using Schwartz-Christoffel conformal mapping, Int. J. Model. Sim. Sci. Compu. Vol.2(3), p.337-354. [DOI: 10.1142/S1793962311000487]
13. Shah, S.A., Orifici, A.C. and Watmuff, J.H., (2015), Water impact of rigid wedges in twodimensional fluid flow, Journal of Applied Fluid Mechanics Vol.8(2), p.329-338. [DOI: 10.18869/acadpub.jafm.67.221.22693]
14. Panahi, R., (2012), Simulation of water-entry and water-exit problems using a moving mesh algorithm, J. of Theoretical and Applied Mechanics, Vol.42, p.79–92. [DOI: 10.2478/v10254-012-0010-3]
15. Panciroli, R., (2013), Water entry of flexible wedges: Some issues on the FSI phenomena, App. Ocean Res, Vol.39, p.72-74. [DOI: 10.1016/j.apor.2012.10.010]
16. Piro, D.J. and Maki K., (2013), Hydroelastic analysis of bodies that enter and exit water, J. Fluids and Structures, Vol.37, p.134-150. [DOI: 10.1016/j.jfluidstructs.2012.09.006]
17. Zhao, R. and Faltinsen, O.M., (1993), Water entry of two-dimensional bodies, J. Fluid Mechanics, Vol.246, p.593–612. [DOI: 10.1017/S002211209300028X]
18. Booki, K. and Yung, S.S., (2003), An efficient numerical method for the solution of two-dimensional hydrodynamic impact problems, 13th International Offshore and Polar Engineering Conference. Honolulu, Hawaii, USA, p.25–30.
19. Zhao, R., Faltinsen, O.M. and Aarsnes, J., (1996), Water entry of arbitrary two-dimensional sections with and without flow separation, 21st Symposium on Naval Hydrodynamics, Trondheim, Norway. National Academy Press, Washington DC., p.408-423.

Send email to the article author


Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.