1. Dean, R. G. and Dalrymple, R. A., (1991), Water wave mechanics for engineers and scientists, World Scientific Publishing. [
DOI:10.1142/1232]
2. CEM, (2002), Coastal Eng. Manual, USACE, EM 1110-2-1100 (Part VI).
3. McCormick, M. E., (2010), Ocean engineering mechanics, New York : Cambridge University Press.
4. Schuttrumpf, H. and van Gent, M.R.A. (2003), Wave Overtopping at Seadikes, Coastal Structures Conference, Portland, Oregon, United States.
5. Owen, M. W., (1980), Design of Seawalls Allowing for Wave Overtopping, Wallingford, UK Hydraulics Research Station, Report No. 924.
6. Owen, M. W., (1982), The Hydraulic Design of Seawall Profiles, Proceedings of the Coastal Protection Conference, Institution of Civil Engineers, Thomas Telford Publishing, London, UK.
7. Allsop, N.W.H., et al., (2008), Improvements in wave overtopping analysis: the EurOtop overtopping manual and calculation tool, COPEDEC VII. pp. 1-14, Dubai.
8. Van de Walle, B., (2003), Wave run-up on rubble mound breakwaters, PhD thesis, Ghent University, 2003.
9. Mariani, A., et al., (2009), Wave Overtopping of Coastal Structures. Physical Model versus Desktop Predictions, Journal of Coastal Research, pp. 534-538.
10. JBA trust. JBA Trust Wave Tank. [Online] 2018. www.jbatrust.org.
11. USACE, (1984), Shore Protection Manual Voume II, Vicksburg, Mississippi : Coastal Engineering Research Center.
12. GNU Affero. Automeris. [Online] 2019. https://apps.automeris.io/wpd/.