Write your message
                  Back to the articles list | Back to browse issues page

XML Print

A Comprehensive Fatigue Damage Assessment and Life Extension Strategy for Jacket-Type Offshore Wind Turbines Using a Semi-Active Control Damper
Sina Mohammadi1 , Reza Dezvareh *2
1- MSc Student, Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran.
2- Associate Professor, Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran.
Abstract:   (102 Views)
Fatigue damage is the predominant failure mechanism for offshore wind turbine support structures, with tubular joints of jacket foundations being particularly vulnerable due to stress concentrations under myriad cyclic loadings. This paper presents a rigorous and detailed methodology for assessing and enhancing the fatigue life of a 5 MW jacket-supported offshore wind turbine (JOWT) through the implementation of an advanced vibration control system. A Semi-Active Liquid Column Gas Damper (SALCGD) is employed to mitigate dynamic responses, thereby reducing stress ranges at critical hotspots. The study employs a multi-step, integrated numerical framework: a high-fidelity finite element model of the JOWT is developed; dynamic analyses are conducted under 29 distinct North Sea wave and wind conditions for three structural configurations—uncontrolled, with a passive damper (TLCGD), and with the semi-active damper (SALCGD); stress time histories at all tubular joints are extracted; critical members are identified based on stress severity; and finally, cumulative fatigue damage is calculated using the Rainflow counting method, relevant S-N curves for welded details, and Palmgren-Miner's rule. The results demonstrate a transformative improvement in fatigue performance. The SALCGD dramatically reduces stress ranges at the hotspots, leading to a remarkable increase in the fatigue life of the most critical structural joints by a factor of 2.5 to 3.2 compared to the uncontrolled case. Furthermore, it outperforms the passive TLCGD, providing up to 1.5 times greater life extension. The analysis reveals that in the uncontrolled scenario, several critical joints, particularly in the wave-dominant lower stories and wind-dominant upper stories, possess a fatigue life shorter than the 20-year design life. The SALCGD successfully elevates the life of all these joints well beyond this critical threshold. This study quantitatively establishes that semi-active vibration control is not merely a serviceability tool but a powerful and essential strategy for significantly extending the operational lifespan, ensuring structural integrity, and improving the economic sustainability of offshore wind infrastructure.
Keywords: Offshore Wind Turbine, Jacket Structure, Fatigue Damage, Tubular Joints, S-N Curve, Rainflow Counting, Semi-Active Damper, Life Extension, Structural Integrity.
Full-Text [PDF 848 kb]   (26 Downloads)    

Highlights
  1. Life Extension Factor: The SALCGD extended the fatigue life of critical joints by a factor of 2.5–3.2 versus the uncontrolled case, and up to 1.5 times compared to the passive TLCGD.
  2. Design-Life Compliance: It elevated the predicted life of all vulnerable joints from below the 20-year design threshold to well above it, ensuring structural integrity.
  3. Load-Zone Differentiation: Life extension was approximately 3.1 times in wave-dominated lower stories versus roughly 2.5 times in wind-dominated upper stories, reflecting the damper's higher efficacy against wave-induced global bending modes.
  4. Adaptive Robustness: Unlike the detuning-prone passive damper, the semi-active controller maintained superior damage suppression across all 29 sea states through real-time property adaptation.
  5. Rigorous Methodology: The study systematically translated global response mitigation into component-level fatigue life, establishing SALCGD as a quantifiable durability and life-extension strategy for offshore wind jackets.

 
Type of Study: Research Paper | Subject: Offshore Structure
Received: 2025/11/3 | Accepted: 2026/04/27
Audio file of the article abstract [MP3 4526 KB]  (6 Download)
References
1. Esteban, M. D., López-Gutiérrez, J. S., Diez, J. J., & Negro, V. (2011). Offshore wind farms: foundations and influence on the littoral processes. Journal of Coastal Research, 656-660.
2. Lu, F., Long, K., Diaeldin, Y., Saeed, A., Zhang, J., & Tao, T. (2023). A time-domain fatigue damage assessment approach for the tripod structure of offshore wind turbines. Sustainable Energy Technologies and Assessments, 60, 103450. [DOI:10.1016/j.seta.2023.103450]
3. Velarde, J., & Bachynski, E. E. (2017). Design and fatigue analysis of monopile foundations to support the DTU 10 MW offshore wind turbine. Energy Procedia, 137, 3-13. [DOI:10.1016/j.egypro.2017.10.330]
4. Muskulus, M. (2015). Simplified rotor load models and fatigue damage estimates for offshore wind turbines. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 373(2035), 20140347. [DOI:10.1098/rsta.2014.0347] [PMID]
5. Marshall, P. W. (2013). Design of welded tubular connections: Basis and use of AWS code provisions (Vol. 37). Elsevier.
6. DNVGL-RP, D. N. V. (2016). C203: Fatigue design of offshore steel structures. Norwegian University of Science and Technology.
7. American Petroleum Institute (API). (2014). API Recommended Practice 2A-WSD, Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms-Working Stress Design.
8. Matsuishi, M., & Endo, T. (1968). Fatigue of metals subjected to varying stress. Japan society of mechanical engineers, Fukuoka, Japan, 68(2), 37-40.
9. Lotsberg, I. (2016). Fatigue design of marine structures. Cambridge University Press. [DOI:10.1017/CBO9781316343982]
10. Spencer Jr, B. F., & Nagarajaiah, S. (2003). State of the art of structural control. Journal of structural engineering, 129(7), 845-856. [DOI:10.1061/(ASCE)0733-9445(2003)129:7(845)]
11. Sun, C., & Jahangiri, V. (2019). Fatigue damage mitigation of offshore wind turbines under real wind and wave conditions. Engineering Structures, 178, 472-483. [DOI:10.1016/j.engstruct.2018.10.053]
12. Colwell, S., & Basu, B. (2009). Tuned liquid column dampers in offshore wind turbines for structural control. Engineering structures, 31(2), 358-368. [DOI:10.1016/j.engstruct.2008.09.001]
13. Hokmabady, H., Mojtahedi, A., Mohammadyzadeh, S., & Ettefagh, M. M. (2019). Structural control of a fixed offshore structure using a new developed tuned liquid column ball gas damper (TLCBGD). Ocean Engineering, 192, 106551. [DOI:10.1016/j.oceaneng.2019.106551]
14. Dezvareh, R. (2020). Upgrading the seismic capacity of pile-supported wharfs using semi-active liquid column gas damper. Journal of Applied and Computational Mechanics, 6(1), 112-124.
15. Dezvareh, R., & Nazokkar, A. (2025). Enhancing Dynamic Performance of OC4-DeepCwind Semi-Submersible Floating Wind Turbine Utilizing Multi-Level Semi-Active Dampers. Arabian Journal for Science and Engineering, 1-23. [DOI:10.1007/s13369-025-10507-0]
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.